Diego Marin – Learning by Building

We’re proud to support Diego Marin, a mechanical engineering student designing and building his own six-axis robotic arm. Using 3D-printed parts and bearings supplied by Simply Bearings, Diego is putting his design skills into practice as he learns how to control the arm’s movements.

Supporting projects like Diego’s is one way we help individual makers and students get hands-on engineering experience, alongside our work with established teams and larger organisations.

Meet Diego Marin

Diego Marin’s interest in engineering began with taking things apart to see how they worked. As a child, he built his first projects from cardboard and DC motors salvaged from remote-controlled cars. A few of those cars never ran again, but their motors kept his new creations moving.

His first Arduino kit let him write code to control what he built, opening a new way to experiment with electronics. 

Today, more than a decade after taking apart his first remote-controlled car, Diego is an 18-year-old mechanical engineering student who designs, builds, and tests his own projects. He uses Fusion 360 to model parts, EasyEDA to design circuits and 3D printers to make the components for his builds.

  •  Ehécatl LCC 3

    With Ehécatl LCC 3, Diego explores how a small, uncrewed capsule can control its own descent. The project brings mechanical design, onboard electronics and programming together to tackle a practical aerospace challenge.

    Watch Video Here 
  • Ehecatl LCC III - MAPC Technologies

    Diego Marin and MAPC Technologies explore small-scale aerospace engineering with Ehecatl LCC III. The project centres on an autonomous capsule and the practical challenge of controlling its descent without a pilot.

    Watch Video Here 

NASA Perseverance Rover Model

Diego Marin designed and built his own scale model of NASA's Perseverance Rover in under 2 months whilst teaching himself Fusion 360. He followed the original rover's geometry as closely as possible, recreating its rocker-bogie suspension with fully functional 3D-printed parts. 

The model drives autonomously, using an onboard ultrasonic sensor to avoid obstacles in real time and transmitting live telemetry as it moves.

The project reflects Diego Marin's approach to learning by building, as he put his new CAD skills to work on a rover he could test for himself.

 Self-Driving Rover 

Ehécatl LCC-3

Diego designed, built and successfully flight-tested Ehécatl LCC 3, a fully autonomous, 3D-printed cargo capsule developed as an experimental research vehicle. 

The capsule uses a mechanical system to release its payload and a drogue parachute to stabilise its descent. Three solid rocket motors slow the capsule before touchdown, aiming to achieve a controlled landing so it can be recovered and flown again.

Diego Marin's Robotic Arm

Diego is designing a six-axis robotic arm from scratch to learn motion control and inverse kinematics, which lets him calculate how each joint needs to move to position the tool. 

The arm is almost entirely 3D printed and uses off-the-shelf NEMA 17 stepper motors, bearings supplied by Simply Bearings and 5:1 planetary gearboxes of Diego’s own design. 

The gearboxes can be stacked to increase the reduction ratio without redesigning them. Diego will build and test the arm in the first phase, then plans to add an automatic tool changer so it can switch tools and take on a wider range of tasks.

Simply Bearings & Diego Marin

At Simply Bearings, we’re proud to support engineers at every stage of their careers. Alongside our work with established engineers, we also help those just starting get the components they need to test their ideas. For Diego, that means supplying the bearings for his six-axis robotic arm as he develops his skills in mechanical design and motion control.

Each of the arm’s six joints is driven by a 3D-printed planetary gearbox. Diego designed the gearbox in stackable stages so he can increase the gear ratio by adding another stage. Each stage uses eight bearings. Six MR93-2Z-MB bearings support the three planet gears, one MR85-2Z-EU bearing supports the sun gear, and one 61704-2RS-EU bearing supports the planet carrier, which transfers motion out of the stage.

At the output of each joint, a 61806-2RS1-EU bearing carries the weight and bending loads of the arm segment, taking that load off the gears and motor. It also keeps the printed parts from rubbing against each other, reducing wear and leaving more motor torque available to move the arm.

To learn more about Diego Marin and explore his latest projects, visit his website using the button below.

Shop the Components

Explore the components we supplied for Diego’s six-axis robotic arm. Select a bearing below to view its specifications and buy it for your own project.

Got a Project In Mind?

Creating something exciting and looking for Support? Whether you're a content creator, engineer, maker, or inventor, we'd love to hear about your project.

If you're interested in partnering with Simply Bearings, sponsorship, or sharing your build with us, get in touch with our team.

Contact us